@font-face { font-family: "ＭＳ 明朝"; }@font-face { font-family: "ＭＳ 明朝"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0in 0in 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }.MsoChpDefault { font-size: 10pt; }div.WordSection1 { page: WordSection1; } How to build a “T” perch For small to medium bird For Larger Macaws increase sizes.
At the Hardware store buy
One pre-made small table top unfinished aprox 18” round although square will work.
One 2”x 2” post 48” long.
PVC pipe ½” x16” long, 2 end caps ½ “
One “Tee Nut” Bags here come in 2 to four ¼” or 15/16”
Two Lag screw/bolt ¼” or 15/16”
One Wing Nut ¼” or 15/16”
One ball of Jute twine or one roll or Vet wrap
Optional is 4 floor levelers
Find the center of your base drill hole for “Tee Nut” use hamer to install your “Tee nut on underside
Find center of your 2x2 drill 2 slightly undersized hole for your Lag Screw one each end, screw 2x2 to base
Find center of your PVC drill hole for your Lag bolt and wing nut
[FONT="]Place jute string over one end of PVC and Lock on with end cap make simple Half hitch knot repeat from one end to the other skipping a space for hole in center lock end of string with end cap. If wanted install levelers . All measurements are American Sorry[/FONT]
, Male Cockatiel-Lusa (aka Bub =D)
